Unlock Spectranet & InterC Huawei MiFi Modem (E5573s-606 &E5573s-320) - MODEM UNLOCKING 101

I saw this tutorial while browsing the Internet and I am sure you will enjoy hand.


Today's tutorial is on how to unlock Huawei MiFi 4G E5573s-320 model number and MiFi modem E5573s-606. Spectranet and interc Modem Huawei falls into this category, but you urge to test your MiFi model well before trying the next;

Unlocking Your router Huawei MiFi 4G E5573s-320 and E5573s-606 will Give You the space to use any SIM card network as 4G ntel smiling Swift INTERC etc ... without any restrictions.

Note: If your model does not have the stipulated specified above, simply pretend that the NFA and click the next post.


>> Huawei Mobile Partner (if you do not, you can download it here)

>> The last HiLink drivers (download here)

>> The last driver Huawei HiLink V5 (download here)

firmware version >> Huawei E5573s-606 (download here)

firmware version >> Huawei E5573s-320 (download here)

>> Huawei calculator Code (download here)

>> Master code generator Universal (download here)

>> Make sure the modem Huawei MiFi (Spectranet, interc) is fully charged

Follow the steps below to unlock the device.

Step 1: Extract the drivers HiLink Huawei previously downloaded and installed on your PC. Once the installation is complete, restart your PC so that drivers can be fully updated with your PC.

Step 2: Unzip and launch the universal master code generator, as in yourimei and click Generate

Step 3: Copy the flash code (laptop) will IMEI generated password

Step 4: Insert an unsupported SIM card on your Huawei E5573s-606 or E5573s-320 router and connect it to your PC via a USB cable.


Step 5: Extract the E5573s-606 Huawei firmware you downloaded and go to the folder where "and Cust Prod & services", run the P711S-E5-update_21. file

Step 6: The password is requested, enter the code from flash copied to your laptop as your password and press the OK button. Wait until the installation is complete. At this stage, do not disconnect the USB cable, the PC should not be demolished or otherwise.

Step 7: Once the process was completed successfully extract and launch Huawei Code Calculator

Step 8: Click the tab read to generate the unlock code as discussed on the result field ()

Step 9: Unzip and open the second firmware Huawei E5573s-320 previously downloaded, run the E5573_Update_21.

router firmware updates and drivers will be installed accordingly.

Step 10: Once the update is complete, go to your partner Huawei mobile interface, select the network settings, and pop-up the unlock code to insert appears.

Step 11: Enter the unlock code generated in step 8 and Huawei MiFi router is unlocked.

With this you can switch any 4G network chip on your MiFi router.


Popular posts from this blog

Full Tuition Master Scholarships Program Sponsored by Japan/World Bank 2018 | Apply Now

Samsung will reduce Galaxy Note 7’s battery capacity via automatic update